6. Configuring IP Address via Console
The Managed Metro Switch is shipped with default IP address shown below.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedures as follows:
Show the current IP Address
1. At the "#" prompt, enter "show ip interface brief".
2. The screen displays the current IP address as shown in Figure 6-1.
Configuring IP Address
3. At the "#" prompt, enter the following command and press <Enter> as shown
in Figure 6-2.
MGSW-24160F# configure terminal
MGSW-24160F(config)# interface vlan 1
MGSW-24160F(config-if-vlan)# ip address 192.168.1.100 255.255.255.0
8
Figure 6-1: IP Information Screen