Daily Operation Instructions - Lightspeed Flexmike User Manual

DAILY OPERATION
INSTRUCTIONS
1. At start of day, remove the microphone(s) from the
charger.
• The microphone will default to the Mute position, the
status will turn to red.
• If using a Flexmike with your system, place the Flexmike
around your neck.
• Press the power/mute button on the microphone. The
status will turn blue, indicating the microphone is active
and ready to use.
• For Flexmike, adjust volume with the UP/DOWN buttons
if necessary.
• If the microphone needs to be powered down for some
time, press and hold the power button. To power the
microphone on again, press and hold the power button
until the blue light begins to blink.
2. Private conversations.
• Mute the microphone during private conversations by
momentarily pressing the power button. When muted,
the blue light turns red.
• When conversation is over, momentarily press the power
button again to unmute the microphone.
3. End of day.
• Remove the Flexmike from around your neck.
• Place the Flexmike into the cradle charger and ensure it
is plugged in to an outlet and/or plug the charging cable
into the Sharemike.
• The microphone will stay powered on during charging,
but will automatically be muted.
• It is not necessary to turn off Multimike as it will
automatically power down after 2 hours without activity.
• If you do want to manually power it down, press and hold
the power button on the front of Multimike. If Multimike
is powered down, then when the microphone is removed
from charging the next day, it will automatically power
the Multimike on.
MICROPHONE AUDIO IN
POWER
1 2
MIN MAX MIN
TONE
MAX TREBLE BASS
Power /
Mute
Power /
Mute
21