Installation; Maintenance - BEA LZR-MICROSCAN T User Manual

READ BEFORE BEGINNING INSTALLATION/PROGRAMMING/SET-UP
PRECAUTIONS
‰ Shut off all power going to header before attempting any wiring procedures.
Maintain a clean and safe environment when working in public areas.
‰
‰ Constantly be aware of pedestrian traffic around the door area.
‰ Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected
reactions by the door.
‰ ESD (electrostatic discharge): Circuit boards are vulnerable to damage by electrostatic discharge. Before
handling any board, ensure you dissipate your body's ESD charge.
‰ Always check placement of all wiring before powering up to ensure that moving door parts will not catch any
wires and cause damage to equipment.
Ensure compliance with all applicable safety standards (i.e. ANSI A156.10) upon completion of installation.
‰
‰ DO NOT attempt any internal repair of the components. All repairs and/or component replacements must be
performed by BEA, Inc. Unauthorized disassembly or repair:
1. May jeopardize personal safety and may expose one to the risk of electrical shock.
2. May adversely affect the safe and reliable performance of the product resulting in a voided warranty.
LASER
IR laser (Class 1)
wavelength 905 nm
max. output pulse power 35 W

INSTALLATION

Avoid extreme vibrations.

MAINTENANCE

It is recommended to clean the
optical parts at least once per
year or more if required due to
environmental conditions.
SAFETY
The door control unit and
the door header must be
correctly grounded.
Page 2 of 16 Page 2 of 16
CAUTION: Use of controls or adjustments
or performance of procedures other than
those specified herein may result in hazardous
radiation exposure.
Do not cover the sensor.
Do not use abrasive
cleaning components.
Only trained and
qualified personnel are
recommended to install
and set up the sensor.
Avoid moving objects and
light sources in detection
zone.
Always test the proper
operation of the
installation before leaving
the premises.
75.5753.15 LZR-MICROSCAN T 20180720 75.5753.15 LZR-MICROSCAN T 20180720
CLASS 1
LASER PRODUCT
Avoid highly reflective objects
in the detection zone.
The warranty is void if
unauthorized repairs are
made or attempted by
unauthorized personnel.