Example Of Setting All Ils Glide Slope Parameters - Keysight Technologies N5171B EXG User Manual

Avionics VOR/ILS (Option 302)
Using ILS Glide Slope Softkeys

Example of Setting All ILS Glide Slope Parameters

1. Press Preset to place the signal generator in a known preset state.
2. Set the ILS Glide Slope carrier frequency.
3. Set the ILS Glide Slope up frequency.
4. Set the ILS Glide Slope down frequency.
5. Set the ILS Glide Slope phase of the down signal relative to the up.
6. Set the ILS Glide Slope DDM polarity to fly up or fly down.
7. Set the ILS Glide Slope DDM value.
Keysight EXG and MXG X-Series Signal Generators User's Guide
a. Press Aux Fctn > Avionics > ILS Glide Slope
b. Press Carrier Freq Index
(Default value is 1 and corresponds to 334.70 MHz.)
c. (Optional) Select a <value> from 1 to 40 and press Enter to change
to a different carrier frequency.)
a. Press Up/Down
b. Press Up Frequency
(Default value is 90 Hz.)
c. (Optional) Select a <value> from 0 Hz to 6 MHz.
a. Press Down Frequency
(Default value is 150 Hz.)
b. (Optional) Select a <value> from 0 Hz to 10 MHz.
a. Press Up/Down Phase
(Default value is 0.00 deg.)
b. (Optional) Select a <value> from 0.00 deg to 360 deg and press
Enter.
a. Press Return
b. Press DDM/SDM
c. Press Fly Up | Down
(Default selection is Up.)
d. (Optional) Select either Up | Down
a. Press DDM
(Default value is 0.0000.)
151