Keysight Technologies N5171B EXG User Manual page 89

Figure 4-6
The U2000 Series USB Power Sensor, does
calibration. If a calibration is attempted with the U2000 Series Power
Sensors, the signal generator displays a message reading:
The U2000 series power sensor does not require a 50 MHz
calibration. Refer to
Figure 4-7
5. Press Return > Return > Channel A to On
The current power meter sensor reading should be displayed in the ChA portion of the
instrument's display and in the upper right portion of the display under Power Meter. Refer to
Figure 4-8.
Figure 4-8
Keysight EXG and MXG X-Series Signal Generators User's Guide
Running Calibration(s) Bar (Zeroing Sensor)
Diagnostic Dialog Box Displayed for U2000 Power Sensor
Channel A Power Sensor Displayed on MXG/EXG
Using the Dual Power Meter Display
not
Figure 4-7 on page 73.
Optimize Performance
For details on
each key, use key
help as described
page 40
on .
require a 50 MHz
For details on
each key, use key
help as described
page 40
on .
For details on
each key, use key
help as described
page 40
on .
73