Triggering - Keysight Technologies N5171B EXG User Manual

BERT (Option UN7)
Bit Error Rate Tester–Option UN7

Triggering

This section describes the operating principles of the triggering function for Option UN7. To see the
signal flow of the triggering function refer to Figure 12-7.
Figure 12-7
In this example, the triggering sequence is where you have an incoming data clock and data bit
sequences, the trigger is active, and the BERT measurement begins. Refer to Figure 12-8.
Figure 12-8
Keysight EXG and MXG X-Series Signal Generators User's Guide 329