Brother HE-800B Service Manual page 79

1. Oil tube assembly
2. Felt holder
3. Screw
4. Oil tube
5. Cord holder #5
6. Plain washer
7. Screw
8. Tube support, R
9. Screw
10. Oil tube
11. Tube support M
12. Screw
13. Fastening bands 1.9×80
14. Felt
15. Wick 4×50
16. Wick 3×150
17. Felt
18. Wick 3×160
19. Felt
20. Wick 4×50×330
21. Tube support U
22. Screw
23. Oil tube
A
1） Insert the oil tube assembly (1) into the arm, and
then insert it into the hole in the thread take-up
cover.
2） Install the felt holder (2) with the screw (3), and then
secure the oil tube assembly (1).
24. Oil tube
25. Tube support
26. Screw
27. Felt
28. Felt support
29. Screw
30. Collar
31. Wick 2×140
32. Oil terminal
33. Packing
34. Oil cap
35. Oil pipe B
36. Tube support
37. Screw
38. Wick base support
39. Screws [2 pcs]
40. Wick 3×290
41. Wick
42. Oil tube
43. Oil tube
44. Felt base A
45. Screw
46. Fastening bands 1.9×80
0695D
Thread
take-up
cover
Thread take-up cover
HE-800B
47. Screws [2 pcs]
48. Felt
49. Cap
50. Screw
51. Plunger [2 pcs]
52. Compression spring [2 pcs]
53. Screws [2 pcs]
54. Oil tube
55. Oil tube
56. Tube support
57. Screw
58. Tube support D
59. Screw
60. Cord holder #10
61. Plain washer
62. Screw
63. Pump filter
64. Spring [2 pcs]
65. Screws [2 pcs]
66. Oil filter mounting plate assy
67. Screws [3 pcs]
B
1） Install the oil tube (4) that is connected between the oil
terminal and the oil outlet with the cord holder (5),
screw (7) and washer (6).
2） Clamp the oil tube assembly (1) under the cord holder
(5).
6. ASSEMBLY
0696D
70