Standard Settings For Treadle Depression Stroke - Brother HE-800B Service Manual

7. ADJUSTMENT

7-21. Standard settings for treadle depression stroke

The following procedure sets the operating positions for the treadle depression strokes to the standard values.
1
Enter the signal settings.
2
Store the maximum forward depression amount.
3
Store the neutral position.
4
Store the maximum backward depression amount.
5
End the settings.
6
Turn off the power switch.
111
While pressing the
0739D
0824D
With the treadle depressed all the way forward, wait until the
voltage display value stabilizes and then press the ENTER
key.
0825D
With your foot released from the treadle, wait until the voltage
display value stabilizes and then press the ENTER key.
0826D
With the treadle depressed all the way backward, wait until
the voltage display value stabilizes and then press the
ENTER key.
0827D
"SUCCESSFUL COMPLETION" will be displayed on the
screen.
NOTE:
If the operation of the treadle is incorrect, a buzzer will
sound.
Repeat the operation from step 2.
0828D
HE-800B
and keys, turn on the power switch.