Download  Print this page

Brother HE-800B Service Manual Page 72

Electronic direct drive lockstitch button holer.
Hide thumbs

Advertisement

6. ASSEMBLY
A
63
Align the center of
the
cutter
and the tip of the
needle.
Motor bracket
Motor lever
Align the reference
line on the motor
bracket
and
the
index
hole
in
the motor lever.
1) Install the needle to the needle bar, and
secure it in position so that the tip of the
needle is aligned with the center of the
cutter groove in the needle plate.
2) Tighten the socket bolt (13) at the position
where the index hole in the motor lever and
the reference line on the motor bracket are
aligned.
* At this time, tighten so that there is no
play in the thrust direction.
groove
0683D
0684D
HE-800B

Advertisement

Table of Contents

Troubleshooting

   Also See for Brother HE-800B

   Related Manuals for Brother HE-800B

Comments to this Manuals

Symbols: 0
Latest comments: