4. USING SD CARDS
4-9. Writing sewing machine data to an SD card
Exit data read/write mode.
Select the [W6] data read/write mode.
Refer to "4-3. Preparation for reading and writing data".
Press the ENTER key.
• The buzzer will sound, and the program data, cycle
program data and memory switch data will be copied
to the SD card.
• The R/W indicator will flash and "OPERATING" will
When the display returns to the status in step 1, writing of
the sewing machine data is complete.
• If you would like to read more data, press the
key to select the read/write menu, and then read
Press any one of the following four keys to exit data