Chapter 2 Preparations
2.2.1
Connecting to a uninterruptible power supply (UPS)
To connect to the uninterruptible power supply (UPS), use the connector output on the rear of the UPS. For
details, refer to the manual supplied with the UPS.
Example
Option slot
Input connector
(NEMA5-15P)
To change the settings for linking the power supply of UPS, select Server and then AC-LINK in the BIOS
setup utility, and change the displayed parameters. Select Power On to perform automatic operations by
using the UPS. For details, see Chapter 2 (1.2.4 Server) in "Maintenance Guide".
122
Computer interface port (UPS)
Overload protection
reset button
Computer interface port (COM)
Voltage sensitivity setting button
Express5800/R110f-1E User's Guide
Connector outputs
TVSS device connector
2. Installation and Connection