Table of Contents
Advertisement
Chapter 2 Preparations
Using optional RAID controller for a 2.5-inch drive model with six hard disk drives installed (1 to 6
drives)
•
Prepare the optional SAS/SATA cables K410-240(00) and K410-204(00).
•
Connect the P0 to P3 connectors of the K410-240(00) to the SATA2 to SATA5 connectors on the
backplane, respectively.
•
Connect the P4 and P5 connectors of the K410-204(00) to the SATA6 and SATA7 connectors on the
backplane, respectively.
•
While matching the pin 1 (indicated by the triangleΔ) of the S1 and the pin 1 (indicated by the bold line) of
the SGPIO1, connect the S1 connector of the K410-240(00) to the SGPIO1 connector on the backplane.
•
While matching the pin 1 (indicated by the triangleΔ) of the S2 and the pin 1 (indicated by the bold line) of
the SGPIO2, connect the S2 connector of the K410-204(00) to the SGPIO2 connector on the backplane.
•
Connect the miniSAS connector of the K410-240(00) to the connectors for ports 0 to 3 on the optional
RAID controller.
•
Connect the miniSAS connector of the K410-204(00) to the connectors for ports 4 to 7 on the optional
RAID controller.
Optional RAID controller
68
Hard disk drive
Ports 0 to 3
Ports 4 to 7
Express5800/R110f-1E User's Guide
Backplane
SLOT 0
SLOT 1
SLOT 2
SLOT 3
SLOT 4
SLOT 5
−
−
1. Installing Internal Optional Devices
SATA 2
SATA 3
SATA 4
SATA 5
SATA 6
SATA 7
−
−
Advertisement
Table of Contents
