Table of Contents
Advertisement
Chapter 2 Preparations
Model name
Product
name
1000BASE-T connection board (1ch)
N8104-138
(Card performance: PCI EXPRESS 2.0 (x1))
1000BASE-T connection board (2ch)
N8104-132
(Card performance: PCI EXPRESS 2.0 (x1))
1000BASE-T connection board (4ch)
N8104-133
(Card performance: PCI EXPRESS 2.0 (x4))
10GBASE-T connection board (SFP+/2 ch)
N8104-128
(Card performance: PCI EXPRESS 2.0 (x8))
10G Converged Network Adapter
N8104-131
(Card performance: PCI EXPRESS 2.0 (x8))
Infiniband connection board (1ch)
N8104-146
(Card performance: PCI EXPRESS 3.0 (x8))
Infiniband connection board (2ch)
N8104-147
(Card performance: PCI EXPRESS 3.0 (x8))
N8117-01A
Additional RS-232C connector kit
Installed as standard
*1 Lane: Indicates the transfer performance (transfer bandwidth).
<e.g.> For PCI Express
1 lane = 2.5 Gbps (unidirectional), 4 lanes = 10 Gbps (unidirectional)
For PCI Express 2.0
1 lane = 5 Gbps (unidirectional), 4 lanes = 20 Gbps (unidirectional)
For PCI Express 3.0
1 lane = 8 Gbps (unidirectional), 4 lanes = 32 Gbps (unidirectional)
Socket: Indicates the connector size. A card up to the number of sockets can be connected.
<e.g.> x4socket = x1card, x4card can be installed. x8 card cannot be installed.
*
Maximum card depth that can be inserted.
LowProfile: Up to 173 mm
*
For details of functions of each card, refer to the technical guide.
*
The card performance described in the parentheses after the Product name indicates the maximum operation
performance of the card.
*
When the operation performance of a PCI card is higher than the PCI slot on the server, the PCI card operates with the
performance of the PCI slot on the server.
84
*1
PCI slot performance
Transfer bandwidth (per lane)
Slot size
PCI card type
Available card size
− Cannot be installed
Can be installed
Express5800/R110f-1E User's Guide
1. Installing Internal Optional Devices
PCI 1A
PCI 1B
X16 lane
x4 lane
8 Gb/s
5 Gb/s
Low profile
x16 socket
x8 socket
Up to 173 mm
For additional LAN
For additional LAN
Prepare SFP module
[N8104-129] if needed.
Teaming (AFT/SFT/ALB) and
bonding on the same board is
supported. Only 1 team per
system.
For RHEL6 (x86), only one board
can be installed
For additional DCB/FcoE.
SFP+ module is factory-installed.
Teaming/bonding with LAN is not
available.
StoragePathSavior supports
redundant bus of FC.
Only one port per system is used
for LAN. Teaming/bonding with
LAN is not available.
For Infiniband FDR(56Gbps)
-
For Infiniband FDR(56Gbps)
-
For additional serial (RS-232C)
port
Up to 1
(2/2)
Remark
Advertisement
Table of Contents
