Table of Contents
Advertisement
Chapter 3 Setup
5. In the DHCP of the Property screen, specify Enable or configure IP Address/Subnet Mask.
6. Connect the LAN cable to the management LAN connector in order to connect to the network.
Access EXPRESSSCOPE Engine 3 by using a web browser from "PC for Management" with the settings
specified by step 5.
134
Tips
If Shared BMC LAN is enabled, Web feature, remote media/KVM feature, or
command line interface feature may be interrupted. In this case, wait for a while,
and connect with network again.
Express5800/R110f-1E User's Guide
3. EXPRESSSCOPE ENGINE 3
Advertisement
Table of Contents
