Table of Contents
Advertisement
Chapter 2 Preparations
•
Installing outer rail
Attach the outer rail you previously removed to the rack.
Fit the square-shaped protrusions of the rail to the
square holes of the rack. Make sure that it makes a
clicking sound indicating that it is locked.
Right figure shows the front right side of the rack. Install
to the rear right side and front and rear left sides
following the same procedure.
Make sure that the rail assembly is installed at the same
height as the other slide rail already installed.
•
Installing the server
114
Important
Confirm that the rails are securely locked.
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
• Do not drop.
• Do not leave the server being pulled out.
• Do not install with the cover removed.
• Do not get your fingers caught.
Express5800/R110f-1E User's Guide
CAUTION
2. Installation and Connection
Advertisement
Table of Contents
