Installing The Server To The Rack Or Removing It From The Rack - NEC N8100-1998F User Manual

Express / express5800 series
Table of Contents

Advertisement

Chapter 2 Preparations
2.1.2

Installing the server to the rack or removing it from the rack

Mount the server to the rack.
About temperature increases and airflow in the rack
Review airflow in the rack and room so that the internal temperature will not exceed the operational
temperature during operation.
Air enters the server from the front and exits from the rear.
112
WARNING
Be sure to observe the following precautions to use the server safety. Failure to
observe the precautions may cause death or serious injury. For details, refer to
Safety precautions in Precautions for Use.
• Do not use any racks out of standards.
• Use only under the specified environment.
CAUTION
Be sure to observe the following precautions to use the server safely. Failure to
observe the precautions may cause burns, injury, and property damage. For
details, refer to Safety precautions in Precautions for Use.
• Do not drop.
• Do not leave the server being pulled out.
• Do not install with the cover removed.
• Do not get your fingers caught.
Express5800/R110f-1E User's Guide
2. Installation and Connection

Advertisement

Table of Contents
loading

This manual is also suitable for:

N8100-1986fN8100-1999fExpress5800 exp284aN8100-2000fExpress5800 r110f-1eNec express5800 series ... Show all

Table of Contents