Table of Contents
Advertisement
3 Installation
1.
Before installing the camera, make sure
the mounting surface can bear three
times the weight of your camera.
2.
Do not let the cables get caught in
improper places or the electric line cover
to be damaged. This may cause a
breakdown or fire.
3.
For the installation process, remove
the camera's dome cover by loosening
the screws at the base of the dome.
4.
Using the mounting template sheet or
the camera itself, mark and drill the
necessary holes in the wall or ceiling.
5.
Pass the wires through and make all
necessary connections. See cabling
section for more information.
6.
To use the camera's water proof wiring:
a.
Install the LAN cable into 'a' .
b.
'b' will be assembled to 'a' with a 1/4
turn.
c.
Thread 'c' tightly to 'b' .Adjust the
camera to obtain an optimum
angle by loosening the lock screws.
7.
Secure the camera to the mounting
surface with the provided screws.
8.
Adjust the camera to obtain an optimum
angle by using the camera's three axis
gimbal. The camera's max angles are:
Pan: 0°~360°
Tilt: 0°~ 70°
Rotation: 0°~ 360°
9.
Remove the protection film softly to
complete the installation.
8
Advertisement
Table of Contents
