Residual Risk Factors - Holzmann TS 250F User Manual

11.5

Residual risk factors

Also in compliance with all safety regulations and when used following residual risks are considered:
 Risk of injury to the hands / fingers through the panel saw blade during operation.
 Risk of injury from contact with live electrical components.
 Risk of injury or ejection fraction or the panel saw blade panel saw blade parts, especially
case of overload and in the wrong direction.
 Hearing, unless arrangements have been made by the user for hearing protection.
 Risk of injury from kickback of the cuttings, the ejection of the cut material or parts of there.
 Risk of injury to the eye by flying debris, even with goggles.
 Risk due to inhalation of toxic dust in chemically treated wood Workpieces.
These risks can be minimized if all safety rules are applied, the machine is properly maintained
and serviced the machine as intended and is serviced by a trained service professional. Despite
all the safety devices and remains her good common sense and your appropriate technical qualifi-
cation / training on the operation of a machine such as the sliding Panel saw TS 250F is the most
important safety factor!
HOLZMANN Maschinen Austria www.holzmann-maschinen.at Strana 30
Formátovací pila / Panel saw TS 250F