Remaining Risk Factors - Holzmann WP 10H User Manual









11.4

Remaining risk factors

Also in compliance with all safety regulations and when used properly, the following residual risks
must be observed:
• Risk of injury by tilting the machine.
• Danger of injury due untrimmed drilling edges, edges of the workpiece.
• Risk of injury, particularly to the eye by flying parts of the workpiece.
These risks can be minimized if all safety rules are applied, the machine is properly maintained
and serviced the machine as intended and is serviced by a trained service professional. Despite
all the safety devices and remains her good common sense and your corresponding technical
suitability / training on the prudent operation of a machine like the WP 10H / 12H WP / WP 20H
of the most important safety factor!
HOLZMANN MASCHINEN GmbH
Use personal safety equipment: ear protector, safety goggles and safety
gloves when working with the machine.
Do not exceed in no case the max. pressing force of the shop press.
Make sure that the workpiece surface, the stamp and the workpiece are free
of lubricants and generally in a clean and dry condition.
Use the Workshop Press exclusively on a solid, stable, level and non-
slippery surface!
Keep hands and feet away while operating from the working area of the
pressure stamp.
Use only high-quality hydraulic oil with the addition or replacement of oil.
Open before operating the ventilation screw (11) by 4 pitches. Close after
operation.
www.holzmann-maschinen.at
WERKSTATTPRESSE / SHOP PRESS / DÍLENSKÝ LIS / PRENSA DE TALLER
SAFETY
Seite 21
WP 10H/WP 12H/WP 20H