Software Updates - Honeywell Lyric LCP300-L User Reference Manual

8. Press Join Join Join Join. A confirmation screen appears.
9. Press OK OK and Save
OK OK
10. Press to return to the previous screen.
Join a WPS Network
1. On the MyHome Gateway App, have the list of Wi-Fi options ready. Don't press any
buttons yet.
2. Press the WPS button on the access point device or router.
3. On the list of Wi-Fi options, press WPS
Stand by for WPS Operation".
4. If the operation is successful, the MyHome Gateway App displays "Device has been
successfully added to the network".
5. Press OK OK OK OK.
If the operation is not successful, the MyHome Gateway App displays Failed Operation.
Device not added to the network. Press OK Device not added to the network
Device not added to the network Device not added to the network
Automatic/Manual Video Recovery
If video from remote cameras is lost or becomes distorted, the system can attempt to reset
video streaming. By default, Gateway automatically begins to recover video about 60
seconds after Wi-Fi communication has been restored.
The default setting is automatic video recovery. You may set recovery to begin only by user
intervention.
On the list of Wi-Fi options, toggle between Automatic Video Recovery
•
Video Recovery. Video Recovery
Video Recovery Video Recovery
Press to return to the Tools menu.
•

Software Updates

Home > Home > Security > Tools > Advanced Security > Tools > Advanced
Home > Home > Security > Tools > Advanced Security > Tools > Advanced
Lyric Gateway
Software updates for the Gateway are published periodically. Certain critical updates are
installed automatically.
You can see the current version of the Gateway's software at
System Information System System Information System Information Information.
After a new SiX™ series sensor or key fob is enrolled in your system, the new
device's software should be updated. This ensures that you are using the most
Sensor Firmware
Normally, SiX™ Series sensors in your system are updated when the Gateway's software is
updated.
To initiate sensor firmware update manually:
1. On the Advanced Advanced Advanced menu, press Update Sensor Firmware Advanced
2. Press Start Start Start Start and follow the instructions on the screen.
3. Press Stop Stop when the update is complete.
Stop Stop
4. Press to return to the Advanced
Save.
Save Save
WPS. The MyHome Gateway App displays "Please
WPS WPS
OK.
OK OK
IMPORTANT IMPORTANT IMPORTANT IMPORTANT
up-to-date version of the software.
Update Sensor Firmware Update Sensor Firmware. Update Sensor Firmware
Advanced Advanced menu. Advanced
46
Failed Operation. Failed Operation. Failed Operation.
Automatic Video Recovery and Manual Automatic Video Recovery Automatic Video Recovery
Security > Tools > Advanced > Security > Tools > Advanced > Security > Tools > Advanced > Security > Tools > Advanced >
Manual Manual Manual