Download  Print this page

Automation: Z-wave And Other Devices; Working With Z-wave Devices - Honeywell Lyric LCP300-L User Reference Manual

Security and home control system.
Hide thumbs

Advertisement

Automation: Z-Wave and Other Devices

Automation can ONLY be used for lifestyle enhancement. It must not be used for
personal safety or property protection.

Working with Z-Wave Devices

Z Z Z Z - - - - Wave automation functionality is supplementary onl
Wave automation functionality is supplementary onl
Wave automation functionality is supplementary onl
Wave automation functionality is supplementary only and has not been
NOTE
evaluated by compliance agency
evaluated by
evaluated by
evaluated by
Z-Wave technology is designed to automate devices in a home control network. The Lyric
Gateway is a security enabled Z-Wave Plus device that uses encrypted Z-Wave Plus encrypted
messages to communicate to other Z-Wave Plus products; is also supports Z-Wave Network
Wide Inclusion (NWI) Mode.
The Gateway and Z-Wave devices added to your system are linked together in a wireless
network. Each device in the network is assigned a unique address and cannot be activated by a
neighbor's Z-Wave controller. The Z-Wave network supports multiple controllers, allowing
remote control of Z-Wave devices throughout the home.
This product can be included and operated in any Z-Wave network with other Z-Wave certified
devices from other manufacturers and/or other applications.
All non-battery operated nodes within the network will act as repeaters, regardless of vendor, to
increase the network reliability.
NOTE
NOTE
NOTES S S S : : : : • Z-Wave Grouping Identifier of Lyric Gateway is 1 and used for the Lifeline association.
NOTE
• The maximum number of devices that can be added to the group is 1.
• Any received BASIC commands will be ignored.
• In some cases, a Z-Wave device might not report its status to the Lyric Gateway
and/or Total Connect when an action is initiated at the device itself (ex. Thermostat
low battery message or manual change of thermostat status). This varies with the
manufacturer.
Press Automation
Automation
Automation
Automation on the Home screen. The Automation (Z-Wave Device) Management screen
appears, initially displaying categories of Z-Wave devices. (Your MyHome Gateway App's display
may differ from these illustrations.)
Automation
This screen may also display "Press to see Failed Devices". See
for more information.
Press the Down arrow (
Home > Automation
Home > Automation
Home > Automation
Home > Automation
IMPORTANT
IMPORTANT
IMPORTANT
IMPORTANT
compliance agency
compliance agency
compliance agency. . . .
) for more options:
25
y and has not been
y and has not been
y and has not been
Failed Devices (Failed Nodes)
Failed Devices (Failed Nodes)
Failed Devices (Failed Nodes)
Failed Devices (Failed Nodes)

Advertisement

This manual also for:

Lyric lcp300-lc

Comments to this Manuals

Symbols: 0
Latest comments: