Adding An Xo Device To The Xo Client - Honeywell ADPRO iFT Series Quick Setup Manual

ADPRO
3. Provide the following information:
Item
English,
Français...
GUI style
Path
Use hardware
acceleration if
available
Save live view
Auto restart
4. Click OK to save the settings.
5. If you have changed the GUI style, close the Login window, and then restart the client application for the
changes to take effect.
You can now add an XO device and connect to it.
7

Adding an XO Device to the XO Client

To add an XO device to the client, proceed as follows:
1. Launch the XO client.
Note
If you have installed the XO client for the first time on this PC, you can add a few demo devices
to familiarise yourself with the XO client before adding your own device(s). Access to the demo
devices is limited; not all features are available. Once you have added your own device(s) to the
client, you can no longer add the demo devices.
2. If you want to add the demo devices, click Demo sites. Continue with the next step to add your own
devices.
27929_07
Description
Select the desired language for the application.
Select a style to change the appearance of the application. The changes will only take
effect after you restart the client software.
If required, change the default work folder (= the folder for storing snapshots and
downloaded recordings).
Select this option if you want to use hardware decoding on your client PC. Hardware
decoding may enhance the rendering performance.
Set this option to Yes if you want to show the last used camera matrix in the live view.
If you set it to No, the live view window is empty when you start the client, and you
have to select the cameras for the live view matrix each time you start the client.
Set this option to Yes if you want the login window to reappear when you close the
client software. This allows you to quickly connect to another XO device.
ADPRO iFT Series Quick Setup Guide
13