Communication Module Replacement - Honeywell Lyric LCP300-L User Reference Manual

Communication Module Replacement

Home > Security > Tools > Advanced > Home > Security >
Home > Security > Home > Security >
Refer to the illustrations below and follow these steps to replace a communication module:
COMMUNICATION
MODULE
SCREW
PULL TAB
COVER
1. Make sure the system is disarmed.
2. From the MyHome Gateway App, select Security
3. Enter the 4-digit Master User code.
4. Select Advanced Advanced, then Install Cellular Module
Advanced Advanced
Follow the on-screen instructions for changing the module.
5. Squeeze inward on the corners of the top cover and remove the top cover as shown.
6. Use the Communication Module pull tab to remove the old module.
7. Insert the replacement Communication module as shown.
8. Press OK OK OK OK on the MyHome
9. Press OK OK. The system returns to the Advanced
OK OK
10. Reboot the Gateway (see
Tools > Advanced > Install
Tools > Advanced > Tools > Advanced >
Squeeze Corners
to remove
Installing the Communication Module Installing the Communication Module Installing the Communication Module Installing the Communication Module
Install Cellular Module.
Install Cellular Module Install Cellular Module
MyHome MyHome MyHome Gateway App Gateway App screen and the system confirms installation. Gateway App Gateway App
Reboot Reboot Reboot Reboot for details).
Install Cellular Module Cellular Module
Install Install Cellular Module Cellular Module
Security, then Tools Tools.
Security Security Tools Tools
Advanced menu.
Advanced Advanced
52
SCREW
DETAIL A