Chimes/Voice Annunciations - Honeywell Lyric LCP300-L User Reference Manual

Clearing an Emergency Alarm
After an Emergency alarm is cancelled, the Gateway continues to display zone information
associated with the alarm (this feature is known as Memory
To cancel and silence the alarm, enter a user code.
To clear memory of alarm on the screen, enter the user code again.
Memory of alarm can also be dismissed with these steps:
1. Cancel and silence the alarm with a user code as above.
2. Select Zones Zones on the Security menu. The zone number associated with the type of
Zones Zones
alarm appears.
3. Press Clear Alarms Clear Alarms Clear Alarms at the bottom of the screen. Clear Alarms
4. Enter a user code. The Zones screen displays "No items to display!"
5. Press to return to the Security menu or press the Home button.

Chimes/Voice Annunciations

The Chime feature is intended for convenience and is not intended for life safety
purposes or pool alarm and does not meet the requirements of UL 2017.
Volume/Mute
Home > Settings Home > Settings Home > Settings Home > Settings
NOTES S S S : : : : • Chime and voice volume/muting can only be changed when the system is NOTE NOTE NOTE
disarmed.
• • • • Voice annunciations are controlled by enabling or disabling Chimes.
• Voice annunciations should not be confused with Gateway's Two-Way Voice
(Audio Alarm Verification) feature.
Gateway can give audible notifications when a protected zone opens while the system is
disarmed. With Chimes enabled three beeps (or a selectable tone) sound at the Gateway disarmed disarmed disarmed
when a protected zone is opened. If programmed, a voice announcement also sounds.
1. On the Home screen, select Settings
2. Select Chime Chime Chime Chime to enable chime sounds and voice annunciations. To mute all, de-select.
For chime sounds only, de-select Voice.
3. Adjust volume with the slider.
4. Press Save Save Save. Save
Setting Chime Sounds
Home > Security > Zones Home > Security > Zones Home > Security > Zones Home > Security > Zones
NOTE NOTES S S S : • Chime sounds can only be changed when the system is disarmed. NOTE NOTE
• Sounds can be changed only for door, window and motion sensors. Sounds
associated with smoke and CO detectors cannot be changed.
Different sounds can be assigned to the sensors in your system.
1. On the Zones menu, press Select All
sensors appears.
2. Select a sensor. The Gateway displays available sounds.
3. Press repeatedly to choose a sound. (Options include Disabled
4. Press to save your selection and return to the Security menu.
Memory Memory of Memory
IMPORTANT IMPORTANT IMPORTANT IMPORTANT
Settings. Settings Settings
Select All repeatedly to choose Select Chime Select All Select All
22
of Alarm of of Alarm). Alarm Alarm
while the system is while the system is while the system is
Select Chime. A list of Select Chime Select Chime
Disabled.) Disabled Disabled