Advanced Tools - Honeywell Lyric LCP300-L User Reference Manual

Advanced Tools

1. From the Z-Wave Device Management screen, press the Down arrow and then Tools
2. Select Advanced Tools Advanced Tools. Advanced Tools Advanced Tools
3. Enter the Master User code. The Advanced Tools screen appears:
View Enrolled Devices
Factory Default Controller
View Enrolled Devices View Enrolled Devices
View Enrolled Devices View Enrolled Devices
Press to display Z-Wave device information: System Index/name, Secured or Non-Secured,
device type, device ID, manufacturer, node number.
View Enrolled Controller View Enrolled Controllers s s s
View Enrolled View Enrolled Controller Controller
Press to display controller information: Primary or Secondary, Z-Wave Library Rev., Home ID,
device type, device ID, node number, manufacturer, Secured or Non-Secured.
Factory Default Controller Factory Default
Factory Default Factory Default
Press to delete all Z-Wave nodes in the Gateway, and reset the Gateway's Home ID. When
prompted, press Yes Yes to confirm. Yes Yes
Important! Defaulting the Controller does not Important!
Important! Important!
Therefore, each device must be Excluded before being added/Included in the Gateway again.
Also, if the controller is used as a secondary controller in the network, use the above
procedure to default the controller only when the primary controller is missing or otherwise
inoperable.
Pri. Pri. Controller Pri. Pri. Controller Controller Shift to Secondary Controller Shift to Secondary Shift to Secondary Shift to Secondary
Press to designate another controller (such as a Z-Wave remote control) as the Primary
Controller.
When the panel displays "Shifting", start the "Learn" function on the secondary controller.
NOTE: : : : NOTE NOTE NOTE The primary to secondary controller shift feature is disabled
Static ID Servers (SIS) so the shifting option is not necessary.
Locking Door Locking Door
Locking Door Locking Door
Press to have your system arm
repeatedly to select the desired arming option: Home
Auto- - - - Home Auto Home (Sta (Stay) y) mode or Disable
Auto Auto Home Home (Sta (Sta y) y)
Learn Learn Learn Learn
This function is usually performed on a control panel or Z-Wave remote control being added
to the system as a secondary controller OR on a secondary controller being designated as
Primary.
Press after starting the Include or Shift Control function on the primary controller.
NOTE: NOTE: Be sure to Default Controller or Exclude all devices before using the "Learn"
NOTE: NOTE:
function.
Locking Door
All Devices O
Controller
Controller Controller
arm automatically when a Z-Wave door lock is locked. Press arm arm
Disabled d d d . Then press Save
Disable Disable
View Enrolled Controllers
Pri. Controller Shift to Secondary
Learn
All Devices On
not delete/Exclude individual Z-Wave devices.
not not
disabled disabled disabled as both function as
Home mode, Away Home Home Away mode, , , , Arm without Away Away
Save.
Save Save
29
Tools.
Tools Tools
Arm without Arm without Arm without