Download  Print this page

Hold; Run; Show (review) - Honeywell Lyric LCP300-L User Reference Manual

Security and home control system.
Hide thumbs

Advertisement

d. After adding a device and its desired operation to the Smart Scene, press Save
Other available devices are displayed again so that they can be added to the Smart
Scene.
NOTE
NOTE: In most situations, specific Security and Device information is displayed by
NOTE
NOTE
pressing the Down arrow.
10. Press Save
Save.
Save
Save
11. Press
to return to the Smart Scenes menu.

Hold

Hold allows Scheduled and Triggered Smart Scenes to be temporarily suspended.
Hold
Hold
Hold
A Scheduled
Scheduled Smart Scene can be put on Hold before
Scheduled
Scheduled
1.
Select a Scheduled or Triggered Smart Scene.
2. Press Hold
Hold. The button is highlighted, and programmed operation will not take place.
Hold
Hold
To remove a Hold:
1.
On the Smart Scenes menu, enter a user code with access to the desired Smart Scene.
2. Select the Smart Scene and un-highlight Hold

Run

Smart Scenes can be manually started with the Run
displayed when the programmed operations have been performed.
NOTE:
NOTE
The Run
Run option can be used to check the outcomes of Scheduled Smart Scenes and
NOTE
NOTE
Run
Run
Triggered Smart Scenes, regardless of programmed triggers.
1.
Select the Smart Scene.
2. Press Run
Run. The system performs the programmed operations and the results are
Run
Run
displayed. Successful operations are displayed with device information and a check mark.
Failed operations are displayed with an empty circle.
Show
(Review)
Use the Show
Show button to see the programmed details of a Smart Scene without running it.
Show
Show
1.
Select the Smart Scene.
2. Press Show
Show. The scene's category, authorized users and included devices are displayed.
Show
Show
before
before
before programmed operations take place.
Hold
Hold. Programmed operation will resume.
Hold
Run button. The Smart Scene's results are
Run
Run
38
Save
Save
Save.

Advertisement

This manual also for:

Lyric lcp300-lc

Comments to this Manuals

Symbols: 0
Latest comments: