Users And Security Codes; User Codes; Duress Code - Honeywell Lyric LCP300-L User Reference Manual

Gateway uses 4-digit codes to restrict certain functions to selected users. A special 4-digit code can
be set to trigger the system's Duress
User codes can be used interchangeably when performing system functions (a system armed with
one user's code can be disarmed by another user's code), with the exception of the Guest Code
described below.
All users are automatically assigned a user number
user numbers with user codes.

User Codes

Master User This code is usually set when the system is installed, and can be
changed later. Typically, the Master User is a household member
who can perform all system functions.
Only the Master User can add and remove users or modify their Only
Only Only
settings. Settings include assigning security codes and user names.
Only Only Only the Master User can create Smart Scene Only
Scenes for other users is controlled by the Master User.
User Typical users are household members and other authorized persons
who can arm and disarm the security system, with controlled access
to other system features.
Guest Visitors and others who are authorized to arm/disarm the system
only at certain times or on a temporary basis.
The Guest's user code can be used to arm
disarm it unless the system was armed using the Guest code. The disarm
disarm disarm
Guest's user number is 47

Duress Code

The Duress function requires connection to an alarm monitoring service.
Household members and authorized visitors can enter this code if forced to disarm or arm the
system under threat. When the Duress code is entered, the Lyric Gateway and keypads appear to
behave normally, but the system silently notifies your alarm monitoring service. The Duress
Code's user number is 48
NOTES: • A security code cannot be assigned more than once. If an existing code is entered, NOTES
NOTES NOTES
the system displays the warning User code not accepted!
return to user settings and assign a different code.
• The system should be disarmed before you work with user codes.
• Limited-access users such as guests and cleaning staff should not be instructed on
system functions other than those they will be using.
• The number of user codes supported by a Z-Wave door lock can vary between
manufacturers. To ensure compatibility with Gateway,
User code on the door lock to be greater than four digits.

Users and Security Codes

Home > Home > Security > Tools Security > Tools > Users
Home > Home > Security > Tools Security > Tools
Duress function. Duress Duress
user number, which cannot be changed. Do not confuse these
user number user number
47 47. 47
IMPORTANT IMPORTANT IMPORTANT IMPORTANT
48.
48 48
> Users
> Users > Users
Smart Scene Smart Scenes s s s . Access to Smart Smart Scene
arm the system, but cannot arm arm
User code not accepted! If this occurs, press OK User code not accepted! User code not accepted!
42
set the length of the Master
OK to OK OK