Chipset Menu; Cpu Advanced Settings - Inspur NF5270M3 User Manual

two options of 【 Disabled 】 and 【 Enabled 】 (default settings).
When this option is set to 【 Enabled 】 , it is required to set related network card
of PXE function to 【 Enabled 】 .
III. Chipset Menu
● CPU Advanced Settings
This menu is used to set related QPI information, PCIE slot transmission rate and
related memory options etc.
* IOH Confi guration
This menu is used to set VGA boot sequence, and transmission rate of all PCIE
slots supported by CPU.
▼ Intel(R) I/0AT
This option is used to open or close Intel I/0 accelerating technology. There're
two options of 【 Enabled 】 and 【 Disabled 】 (default settings).
▼ VGA Priority
This option is used to set priority of integrated display card and external display
card, options include:
【 Offboard 】 (default): External display card is the prior device.
【 Onboard 】 : Mainboard integrated display card is the prior device.
▼IOH PCIe Link Speed Control
PCIE_0/PCIE_1/ PCIE_2/PCIE_3/ PCIE_4/PCIE_5 Link Speed Control
Sets transmission rates of PCIE_0/PCIE_1/ PCIE_2/PCIE_3/ PCIE_4/PCIE_5
slots respectively, including three options of 【 GEN3 】 (default), 【 GEN2 】 and 【 GEN1 】 .
* QPI Confi guration
Submenu option of this menu could be used to set options such as QPI speed
mode and frequency etc.
If it is single CPU confi guration, when "QPI Link Speed Mode" option is set to
【 Fast 】 , actual display status of "Current QPI Link Speed" will be Slow.
* DIMM Information
This menu is used to view installation slots of system memory supported CPU
and memory volume information.
▼ Memory Mode
Set memory mode, there're 4 options of 【 Independent 】 , 【 Mirroring 】 , 【 Lock
Step 】 and 【 Sparing 】 .
If memory confi guration of the system supports 【 Mirroring 】 and 【 Sparing 】
Chapter Three System Setup Chapter Three System Setup
17