Driver Make - Inspur NF5270M3 User Manual

Chapter Five Operation System Installation Chapter Five Operation System Installation
Warning:
During operation system installation by using Inspur drive, Inspur drive
U disk may be detected in disk partition interface, at this time, you need to
distinguish U disk and hard disk, do not delete or format U disk.
During operation system installation, if you need to boot system from hard
disk after reboot, it is required to enter server BIOS to set, so as to guarantee hard
disk boot sequence is before U disk boot sequence, and system could boot from
hard disk, otherwise, system will not be able to boot from hard disk.
The following is a brief introduction on the making of mainboard integrated hard
disk controller drive, while installing operation system via using Inspur drive U disk.
For driver make of external RAID card or SAS card, please refer to related content in
external card drive CD.

Driver Make

1. Prepare a computer confi gured with Windows system, connect Inspur drive U
disk to USB port of the computer, as shown in the following fi gure, Inspur drive U disk
will be recognized into two parts of analog fl oppy disk [3½ Floppy(A:)] and U disk
normal partition [Removable Disk (E:)], among which drive E in [Removable Disk (E:)]
will be different according to actual partition in your computer.
30