Pulse Output Function - Panasonic FP-X0 L14R User Manual

7.4 Pulse Output Function

7.4.1 Overview of Pulse Output Function
Instructions used and the contents of the controls
Type of control
Forced stop,
deceleration stop
Read/Write of
elapsed value
JOG operation
Home return
Trapezoidal
control
Data table control
Linear
interpolation
Setting the system register
For using the pulse output function, it is necessary to set the system register No. 402.
7.4.2 Types of Pulse Output Method and Operation Modes
Clockwise/counter-clockwise output method
Pulse/direction output method (forward: OFF/reverse: ON)
Pulse/direction output method (forward: ON/reverse: OFF)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Instruction Description
number
F0 Controls to stop a specified channel.
F1 Reads and writes the elapsed value of the built-in high-speed
counter during the pulse output control.
F172 Outputs pulses as long as the execution condition is on.
F177 Performs the home return in a specified channel.
F171 Automatically outputs pulses with the trapezoidal control by
specifying the initial speed, target speed, acceleration time,
deceleration time and target value.
F174 Outputs pulses according to a specified data table.
F175 Performs the linear interpolation control by specifying the
composite speed, acceleration time, deceleration time, X-axis
target value and Y-axis target value.
Control is carried out using two pulses: a
forward rotation pulse and a reverse
rotation pulse.
Control is carried out using one pulse
output to specify the speed and another
to specify the direction of rotation with
on/off signals. In this mode, forward
rotation is carried out when the rotation
direction (sign) signal is OFF.
Control is carried out using one pulse
output to specify the speed and another
to specify the direction of rotation with
on/off signals. In this mode, forward
rotation is carried out when the rotation
direction (sign) signals is ON.