Panasonic FP-X0 L14R User Manual page 143

The explanation below shows the case that home return is performed with the following conditions; Initial
speed: 1 kHz, Target speed: 5 kHz, Creep speed: 500Hz, Acceleration time: 300 ms, Deceleration time:
500 ms.
Example of timing chart
Data table
Data
Setting item (Unit)
register No.
DT200 Control code
DT202 Initial speed (Hz)
DT204 Target speed (Hz)
DT206 Acceleration time (ms)
DT208 Deceleration time (ms) K500
DT210 Creep speed (Hz)
Deviation counter clear
DT212
signal output time
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Example of sample
program
Home return type 1
Operation mode: Reverse
CW/CCW
H1001 0010
K1000
K5000
K300
K500
K0 (Not output)
Settable range
Set according to the control code
on the next page.
K1 to K20000 (L14/L30 type)
K1 to K50000 (L40/L60 type)
K1 to K20000 (L14/L30 type)
K1 to K50000 (L40/L60 type)
K1 to K32760
K1 to K32760
K1 to K20000 (L14/L30 type)
K1 to K50000 (L40/L60 type)
K0:Not output deviation counter
clear signal
K1 to K200 x 0.5ms(0.5ms～100ms)