Panasonic FP-X0 L14R User Manual page 159

How to permit access with password
1. Select "Tool" > "Set PLC Password" in the menu bar.
The "Set PLC Password" dialog box is displayed.
Set the items in the table below, and click on the "Settings" button.
Item
Digit number
Operation Mode
4 digits or 8 digits
Once access is permitted, the following message is displayed.
3. Click the "OK" button.
Note:
If the power supply of the PLC is turned on/off when the access is permitted, the PLC will be password
protected again.
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Settings
Select "4 digits" or "8 digits".
Select "Access".
Input the set password.
8-5