Clear Data; Cycle Count - Snap-On ControlTech Micro User Instructions

Deleting Stored Torque and Angle Data
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight

CLEAR DATA

CLEAR ALL DATA screen.
3. In CLEAR ALL DATA screen, highlight
selection to exit without deleting data.
4. Press ENTER button after making selection.
00
100.0
IN-LB
M
Target Screen
Note: If wrench is Locked (see Preset Lock in Advanced section), Clear Data function is disabled.
Viewing and Clearing Wrench Cycle Counter
Each time torque or angle target is reached, wrench cycle counter is incremented. Maximum cycle
count is 999999.
1. From target torque or angle screen, press and hold ENTER button for 3 seconds.
2. Highlight

CYCLE COUNT

3. Press ENTER button to display CYCLE COUNT screen.
4. To exit CYCLE COUNT screen without clearing count, press ENTER button while
is highlighted.
5. To reset wrench cycle count to 0, highlight
6. EXIT menu selection is automatically highlighted after count is cleared. Press ENTER button to
return to main menu.
00
100.0
IN-LB
M
Target Screen
Note: If wrench is Locked (see Preset Lock in Advanced section) Clear count function is disabled.
Language
1. To select language menu, press ENTER button while
desired language and press ENTER button.
2. Decimal Mark selection menu is displayed. Decimal separator can be a comma or decimal point.
Use UP/DOWN buttons to select decimal separator then press the ENTER button.
Note: Decimal separator will affect formatting of downloaded data when opened by Excel depending
on Windows® regional settings.
menu selection using UP/DOWN buttons then press ENTER button to display
ENTER
EXIT
button
SET HEAD LENGTH
held
SHOW DATA
UP/DOWN buttons
SET HEAD LENGTH
SHOW DATA
CLEAR DATA
menu selection using UP/DOWN buttons.
ENTER
EXIT
button
SET HEAD LENGTH
held
SHOW DATA
UP/DOWN buttons
SHOW DATA
CLEAR DATA
CYCLE COUNT
YES menu selection to delete all stored data, or
CLEAR ALL DATA
YES
NO
UP/DOWN buttons
CLEAR ALL DATA
ENTER
button
YES
NO
CLEAR menu selection then press ENTER button.
COUNT: 12
CLEAR
EXIT
UP/DOWN buttons
ENTER
COUNT: 12
button
CLEAR
EXIT
LANGUAGE
8
SET HEAD LENGTH
ENTER
button
SHOW DATA
CLEAR DATA
EXIT menu selection
COUNT: 0
ENTER
button
CLEAR
EXIT
ENTER button
ENTER
SHOW DATA
button
CLEAR DATA
CYCLE COUNT
is highlighted then highlight
NO menu