Battery Type - Snap-On ControlTech Micro User Instructions

EXIT
SHOW INFO
SLEEP TIME
UP/DOWN buttons
AUTO BACKLIGHT
TOGGLE BCKLGHT
VIBRATOR CONFIG
ENTER
button
Battery Type Selection
This function will allow user to configure the battery discharge thresholds for the type of battery used.
1. From Settings menu, use UP

ENTER button.

2. BATTERY TYPE screen is displayed.
3. Use UP /DOWN



4. Press ENTER

EXIT
SHOW INFO
SLEEP TIME
UP/DOWN buttons
TOGGLE BCKLGHT
VIBRATOR CONFIG

BATTERY TYPE

ENTER
button
Note: Wrench is configured for Lithium battery shipped from factory. If Lithium battery is replaced
with Alkaline or rechargeable Nickel-Metal Hydride (NIMH), battery type should be changed so
battery level icon and LOW battery warnings function optimally. Battery life (REPLACE) will not
be impacted, however 50% and Low will be optimized to show most accurate linear discharge
time.
ENTER
VIBRATOR CONFIG
button
ENABLE
DISABLE
UP/DOWN buttons
VIBRATOR CONFIG
ENABLE
DISABLE
/DOWN


buttons to select the type of battery being used.


button to accept selection and exit to Settings menu.
ENTER
LITHIUM
button
ALKALINE
NIMH
UP/DOWN buttons
LITHIUM
ALKALINE
NIMH
buttons to highlight


16
BATTERY TYPE selection then press