Numberfilter - Vidicode 010.01830 Manual

When "Always" is selected the message is played on both
•
incoming and outgoing calls.
When "Off" is selected there is no notification.
•
The notification is standard disabled.
Please refer to § 6.1 how to record the notification message.
Press NEXT NEXT NEXT to continue in the menu with the Numberfilter NEXT
•
or press STOP STOP STOP to exit the configura STOP

4.5 Numberfilter

The numberfilter is used to hide or replace extension numbers on
outgoing calls. The reason to do this is that the PBX has to disclose the
internal number to the recorder which will allow you to sort the
recordings by the extension number.
Depending on the setting the number can be hidden altogether or
replaced by the general number.
Numberfilter: Off
NEXT
Press CHANGE CHANGE to change Numberfilter method. Select one of the
CHANGE CHANGE
•
following options: Remove, Hide, Replace, Off
•
These options work as follows:
•
When "Remove Remove" is selected the entire number is removed from the
Remove Remove
outgoing protocol communication, your service provider will fill in the
number with the general number.
When "Hide Hide" is selected the number is removed and the number is Hide Hide
marked as restricted, the called party is not able to see your number.
When "Replace Replace" is selected the number is replaced by a replacement
Replace Replace
number that can be entered afterwards in the next menu item (only
when "Replace' is selected). Please note most service providers don't
allow replacement and will correct the replacement with the general
number.
When "Off Off" is selected there is no number filtering active.
Off Off
•
The numberfilter is standard disabled.
22 Call Recorder PRI manual © 2009-2014 Vidicode®
configuration configura configura tion menu. tion tion
CHANGE
Numberfilter setting Numberfilter Numberfilter
STOP