Replacement; Action - Vidicode 010.01830 Manual

4.6 Replacement

When "Replace Replace Replace Replace" is selected as action type for the numberfilter, the
replacement string determines what the Call Recorder will send to the
remote caller. You must fill in the number that you want the remote
caller to see.
The replacement number must be a number that really belongs to the
line bundle that you have, otherwise the telephone provider will filter it
out. Normally the main number of the organization will be used.
Replacement: <empty>
NEXT
Press NEXT NEXT to continue in the menu with the [ [ [ [
NEXT NEXT
•
or press STOP STOP to exit the configuration
STOP STOP
4.7 [

] Action

While recording, the Call Recorder can be controlled from the local
telephone that it is recording. It will respond with a predetermined
action when the "star" ( ) key on the telephone is pressed twice
will send the corresponding DTMF tones to the recorder.
Important: Important:
Important: Important:
The configuration of the Action determines how the Call Recorder
behaves while recording. To give you an example: When manual start
selected, the Call Recorder will not
command.
The predetermined action that is enabled may overrule the
configuration as set with whitelist, blacklist and Auto-Delete. It also is a
possible way to control the e-mail function.
[**] Action: Off
NEXT
Call Recorder PRI manual © 2009-2014 Vidicode®
CHANGE
configuration menu.
configuration configuration
not record anything until it receives the
not not
CHANGE
STOP
] ] ] ] Act Action ion setting
Act Act ion ion
twice. This twice twice
start is start start
STOP
23