Quantum DXi4701 User Manual page 349

Quantum DXi4701 User's Guide
1 Under Web Administrator Password or under Web Monitor
Password, enter the following information:
• Old Password - Enter the old password.
• New Password - Enter the new password.
• Confirm New Password - Enter the new password again to
confirm it.
Note: The default password is password.
Note: Passwords are limited to 15 characters. Alphanumeric
characters and special characters are allowed.
2 Click Apply.
Enabling CLI Accounts
The CLI accounts provide access to the DXi4701 command line interface
as an administrator or monitor.
Note: For more information about using the CLI, see the DXi4701
Command Line Interface (CLI) Guide.
To enable or disable the CLI accounts:
1 Under CLI Administrator Login Settings or under CLI Monitor
Login Settings, do one of the following steps:
• Select the Enable CLI Login check box to enable the CLI
account.
• Clear the Enable CLI Login check box to disable the CLI
account.
2 Click Apply.
Changing CLI Passwords
Use the CLI passwords when logging onto the command line interface
as an administrator or monitor.
To change the CLI passwords:
1 Under CLI Administrator Login Settings or under CLI Monitor
Login Settings, select the Change password option.
Chapter 9: DXi4701 Configuration
System
323