Quantum DXi4701 User Manual page 324

Chapter 9: DXi4701 Configuration
Scheduler
298
1 On the Scheduler page, add or edit an event in the NAS
Replication or VTL Replication row (see
Scheduled Event
2 In the Share or Partition drop-down box, select the share or
partition to schedule for replication.
Only shares or partitions that are enabled for deduplication appear
in the drop-down box.
Note: Scheduling a share or partition that has replication
disabled will automatically enable replication.
3 In the Target drop-down box, select the replication target you want
to replicate the share or partition to.
4 Click OK.
5 (Optional) Specify when and how often the event reoccurs (see
Setting Recurrence for a Scheduled Event
6 Click Apply.
Scheduling Replication Throttling
During replication throttling, the DXi4701 limits the amount of source
replication data it sends to not exceed a specified maximum bandwidth.
Schedule replication throttling to control the amount of network
bandwidth used by source replication at certain times. For example, you
might configure replication throttling to occur during planned backup
times to avoid network contention.
Note: For more information about configuring the DXi4701 for
replication, see
To schedule replication throttling:
1 On the Scheduler page, add or edit an event in the Replication
Throttle row (see
page 295).
2 Specify the maximum allowed bandwidth by entering a value in the
Bandwidth box and selecting the units in the drop-down box (KB/s
or MB/s). The lowest value you can set is 32 KB/s. The highest value
you can set is 125 MB/s.
on page 295).
DXi4701 Replication
Adding or Editing a Scheduled Event
Adding or Editing a
on page 301).
on page 113.
on
Quantum DXi4701 User's Guide