Quantum DXi4701 User Manual page 184

Chapter 6: DXi4701 Replication
Receive VTL
158
The Partitions Eligible for Replication section displays the following
information:
• Partition Name - The name of the partition.
• State - The state of Cartridge Based Replication for the partition
(Enabled or Disabled).
• Sync ID - The Sync ID used to identify the source partition that
will send replicated data to the partition.
• Access - The selected access option for the partition (Locked or
Unlocked).
Note: Click the Information button [i] next to a partition to display
detailed information about the partition and recent replication
activity.
Configuring a Target Partition for Cartridge Based Replication
Configuring a VTL partition for Cartridge Based Replication enables the
automatic replication of cartridges on the source partition to the target
partition. Before you configure a partition on the source system for
Cartridge Based Replication, you must configure a partition on the
target system to receive the replicated data from the source partition.
Note: For information about configuring Cartridge Based Replication
on the source system, see
Cartridge Based Replication
To configure a target partition for Cartridge Based Replication:
1 Select the partition and click Edit.
The Edit Partition Settings page displays (see
Configuring Directory/File or
on page 127.
Figure
Quantum DXi4701 User's Guide
86).