Quantum DXi4701 User Manual page 262

Chapter 9: DXi4701 Configuration
VTL
236
After you select an action, the table is updated to show only the
cartridges that support the selected action. Select Show All Media
in the Action drop-down box to see all cartridges.
3 (Optional) To reduce the number of cartridges displayed in the table,
enter a barcode or barcode range in the Barcode Filter box and
click Apply Filter.
Use a hyphen (-) to indicate a range, and use an asterisk (*) to
indicate a wildcard. Separate multiple entries with commas, and do
not use spaces.
For example, enter AAA* to display all cartridge barcodes beginning
with AAA. Or enter AAA010-AAA020 to display all barcodes in the
specified range. Click the Quick Tip icon [?] for additional examples.
4 Select the cartridges to perform the action on. The action is
performed only for selected cartridges on the current page.
Or select the check box in the table heading row to perform the
action on all cartridges in the partition.
Note: If necessary, use the controls at the bottom of the table to
navigate between multiple pages of results. Select the
number of rows to display in the Show drop-down box.
5 Click Apply.
Media Move
Use the Media Move page to move a virtual tape cartridge from a
source location (drive, storage slot, or I/E slot) to a destination location
(drive, storage slot, or I/E slot). The location and destination must be in
the same partition.
Note: If you do not create and associate a host access group with a
partition, the virtual devices are not visible from the host, and
drives cannot be destinations for move operations (see
Host Access
Caution: Moving a virtual tape cartridge might disrupt backup jobs.
To access the Media Move page, on the Media page, click the Move
tab (see Figure 131).
on page 240).
Remote
Quantum DXi4701 User's Guide