Quantum DXi4701 User Manual page 264

Chapter 9: DXi4701 Configuration
VTL
238
Note: If necessary, use the controls at the bottom of the table to
navigate between multiple pages of results. Select the
number of rows to display in the Show drop-down box.
7 In the Destination Location drop-down box, select the type of
location you want to move the cartridge to (Drive, Storage Slot, I/E
Slot).
8 Select the destination location to move the cartridge to.
Note: The destination section displays empty drives, storage slots,
and I/E slots. Offline drives are not displayed. A drive might
be offline if it has not been mapped to a host (see
Host Access
9 Click Apply.
10 Return the partition to an online state (see
on page 230).
Media Unload
Use the Media Unload page to perform a bulk unload of virtual tape
cartridges from drives or I/E slots.
Note: If you do not create and associate a host access group with a
partition, the virtual devices are not visible from the host, and
drives cannot be destinations for move operations (see
Host Access
Caution: If you unload a virtual tape cartridge from a drive while a
backup to that drive is in progress, the backup job will fail.
To access the Media Unload page, on the Media page, click the Unload
tab (see Figure 132).
on page 240).
on page 240).
Remote
Changing Partition Mode
Remote
Quantum DXi4701 User's Guide