Removal And Installation Of 3-Point Hitch Implement (With Pto Shaft) - Kioti CK2810 Manual

6
5 5
   ck2810 / ck3010H mX70/mX80/mX90/mX100 mX70/mX80/mX90/mX100
- - -

REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT (wITH PTO sHAfT)

(1) implement support
(2) implement pin
1. place implement on the level
ground.
2. drive the tractor backward to move
as close as possible to an imple-
ment (approx. 5 cm). then, adjust
the height of the lower link to be
parallel to the pins of the imple-
ment.
3. put all the shift levers in the neu-
tral position.
m56(tB110)(Ck2810)-호주판-om-06.ind2 2
H61O608b
(1) check Link (2) turn Buckle
4. Lengthen the chain by turning the
check link turn buckle.
IMPORTANT
•
when attaching or detach-
ing an implement, be sure to
loosen the left and right check
chains to utilize the lower link
ball assembly effectively.
H61O601A
(1) turn Buckle (2) Lift rod (rH)
(3) Lower Link (4) implement pin
(5) Lynch pin
5. first install the left lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely.
6. install the right lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely .
H61O615A
2012-10-16 오후 2:36:48