Installation And Removal Of 3-Point Hitch Implement (With Pto Shaft); Installation And Removal Of 3-Point Hitch Implement (With Pto Shaft) - Kioti DS3510 Owner's Manual

6
 ds3510
-

INsTALLATION AND REMOvAL Of 3-POINT HITCH IMPLEMENT (wITH PTO sHAfT)

(1) Implement support (2) Implement pin
1. place implement on the level
ground.
2. drive the tractor backward to move
as close as possible to an imple-
ment (approx. 5 cm). then, adjust
the height of the lower link to be
parallel to the pins of the imple-
ment.
3. put all the shift levers in the neu-
tral position.
DS3510(UM26)-AU-06.indd 2
H61O608b
(1) check Link
4. Lengthen the chain by turning the
check link turn buckle.
H61O601A
(2) turn buckle (1) turn buckle
(3) Lower Link
(5) Lynch pin
5. first install the left lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely.
6. Install the right lower link to the
implement pin and insert lynch pin
into the hole and turn the ring to
hold implement pin securely .
H61O615A
(2) Lift Rod (Rh)
(4) Implement pin
2010-12-31 오후 3:41:36