6
Rx6030 / Rx7030 / Rx8030
-
REMOvAL AND INsTALLATION Of 3-POINT HITCH IMPLEMENT (wITH PTO sHAfT)
(1) Implement support
1. drive the tractor backwards to
move close to an implement (ap-
prox. 5 cm). then, adjust the
height of the lower link to be paral-
lel to the pins of the implement.
2. put all the shift levers in the neu-
tral position, stop the engine, and
apply the parking brake.
TF120(RX6030,7030,8030)-AU-06.in2 2
H11O562A
(1) telescopic stabilizers pin
3. Remove both of the telescopic
Stabilizers fixing pins.
IMPORTANT
when removing/installing an
implement, remove the check
link pin to use the lower link
end (cassette type) effectively.
H11O567A
(1) Latch
4. press the latch to pull out the low-
er link end. (cassette type)
H11O564A
(2) Lower Link end
2015-10-29 오후 2:26:30