Checking Intake Air Line (X); Checking Intake Air Line (X); Adjusting Toe-In (Y); Adjusting Toe-In (Y) - Kioti CK2810 Manual

7
2 ck2810 / ck3010h
-

CHeCking inTAke AiR Line (x)

(1) air line hose
1. if the hose clamps are loose ,
tighten clamps securely.
2. if the hoses and clamps are dam-
aged, you must replace them at
once. failure to do so could lead
to engine damage.
M56(TB110)(CK2810)-호주판-OM-07.ind26 26

ADJUSTing Toe-in (y)

ADjUsTING PROCEDURE
S35O702A
(a) wheel - to - wheel distance at front
(B) wheel - to - wheel distance at rear
1. Park tractor on a flat surface
2. tu r n s t e e r i n g w h e e l s o f r o n t
wheels are pointed straight ahead.
3. lower the implement, lock the
parking brake and stop the engine.
4. measure distance between tire
beads (center) at front of tire and
hub height.
5. measure distance between tire
beads at the rear of tire and hub
height.
6. front distance should be 2~8 mm
less than rear distance. if not, ad-
just the tie rod length.
READjUsTMENT
T46OA36A
(1) tie rod lock nut
1. loosen the lock nut and turn the
turnbuckle to adjust the rod length
until the proper toe-in measure-
ment is obtained.
2. check the toe-in value after the tie
rod is adjusted.
3. adjust it again if necessary.
M56O752A
(2) tie rod
2012-10-16 오후 2:47:30