Blind Transfer - Snom D785 User Manual

D785 User Manual

Blind transfer

• Blind transfer of active call
1. With a call on the line (Fig. 1), press
Fig. 1
2. Dial the number (Fig. 2). You can also select a number from the internal or one of the
available external phone directories (see "Calling number from phone directory" on page 51
and "Calling number from external directory" on page 51).
3. Press . You may briefly see the message "Disconnected" followed by the caller's name/
number, indicating that the transfer was completed.
If a call is waiting (Fig. 3), as indicated by the symbol
reject the call waiting before you can transfer your active call blindly.
Fig. 3
a. Press the function key underneath
b. Press to reject the call. The caller hears the busy signal.
Note: If you want to transfer the call waiting, see next section.
• Blind transfer of call waiting
1. If you are in a call and want to transfer a call waiting (Fig. 3, above), press the function key
underneath
Note: Your active call will remain active while you are transferring the ringing
call.
2. Press . The dial screen (Fig. 2, above) appears.
3. Enter the number of the third party you intend to transfer the call to and press
"Connected" screen (Fig. 1, above) with your current call reappears.
Fig. 2
Fig. 4
. The "Call Waiting" screen (Fig. 4, above) appears.
. The dial screen will appear.
in the lower right corner, you must
. The "Call Waiting" screen (Fig. 4) appears.
61
Using the Phone
. The