6. How to control the fixture
There are three ways to set-up the DMX address:
A. Universal DMX controller
B. Master/Slave operation
C. Easy controller (by CA-8)
A. Universal DMX controller
The user need to set the lighting channel mode first while control by universal DMX
controller. The fixture has four kinds of channel modes (4-ch, 6-ch, 9-ch, 15-ch, 27-ch, 24-ch.
It can set the channel mode from its LED display panel. Please refer to the following
diagram to use your controller to activate the fixture.
11E
3.1 Fuse Replacement
The fuse of Color Fusion may be replaced as below.
First, disconnect AC mains power before replacing and replace with the same fuse.
4.How to Set the Unit
4.1 Control Panel
Display
To show the menu and selected function
LED
DMX
On
MASTER
On
SLAVE
On
SOUND
Flashing
DMX input present
Master mode
Slave mode
Sound activation
4E