Table Of Contents; Dmx512 Connection - ACME Color Fusion CF-805 User Manual

TABLE OF CONTENTS

1. Safety Instructions
2. Technical Specifications
3. Installation
3.1 Fuse Replacement
4. How to Set the Unit
4.1. Control Panel
4.2. Main Function
5. DMX512 Address setting
6. How to control the fixture

7. DMX512 Connection

8. Fixture Cleaning
1E
Blackout To blackout all the fixture
Function Strobe Select 9 Colors
1.Synchronous 1. White
strobe in white 2. Red
2. Synchronous 3. Green
strobe in rainbow 4. Orange
3. Synchronous 5. Purple
sound in white 6. Yellow
4. Synchronous 7. Cyan
sound in rainbow 8. Magenta
9. Blue
Sound Latch
Mode
(LED OFF) (LED on)
7. DMX512 Connection
The DMX 512 is widely used in intelligent lighting control, with a maximum of 512 channels.
1. Connect the unit together in a "daisy chain" by XLR plug cable from the output of the unit
to the input of the next unit. The cable cannot be branched or split to a "Y" cable.
Inadequate or damaged cables, soldered joints or corroded connectors can easily distort
the signal and shut down the system
2. The DMX output and input connectors are pass-through to maintain the DMX circuit when
no power is connected to the fixture.
3. At last fixture, the DMX cable has to be terminated with a terminator to reduce signal
errors. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a
Show Modes Setting speed
1. Show 1 1. Slow speed
2. Show 2 2. Middle speed
3. Show 3 3. Fast speed
4. Show 4
5. Show 5
6. Show 6
7. Show 7
8. Show 8
9. Fade
Chase Speed
(LED Slow blink) (LED Fast blink)
14E