Dmx 512 Address Setting; Auto Address; Show Mode; Blackout Mode - ACME Color Fusion CF-805 User Manual

DMX 512 Address Setting

Press the MENU button until the
and the display will blink. Use DOWN and UP button to change the DMX 512 address. Once
the address has been selected, press the ENTER button to setup or automatically return to
the main functions without any change after 8 seconds. To go back to the functions
without any change press the MENU button again.

Auto Address

Press the MENU button up to when the
button and the display will Auto setting DMX512 Address. To go back to the functions press
the MENU button again.
4，6，9，15，27，24Channel Mode.
Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the 4-ch, 6-ch, 9-ch, 15-ch,
27-ch or 24-ch Channel Mode. Once the mode has been selected, press the ENTER button
to setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.

Show Mode

Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
or (show 1) ... (show 8) or
been selected, press the ENTER button to set the chase speed (1: slow~8: fast) or
automatically return to the main functions without any change after 8 seconds. To go back to
the functions without any change press the MENU button again.
Sound Mode
Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
(Sound off) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
is shown on the display. Pressing ENTER button
is blinking on the display. Pressing ENTER
is shown on the display. Pressing ENTER button
is showing on the display. Pressing ENTER button
(random mode)
(auto fade) mode. Once the mode has
is showing on the display. Pressing ENTER button
(Sound on) or
7E

Blackout Mode

Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
(no blackout) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Led Display
Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
(Led off) mode. Once the mode has been selected, press the ENTER button to
setup or automatically return to the main functions without any change after 8 seconds. To
go back to the functions without any change press the MENU button again.
Color Mode
Press the MENU button until the
and the display will blink. Use DOWN and UP button to select the
(color 9) or (manual color) mode. Once the mode has been selected, press
the ENTER button to setup. Use DOWN and UP button to set the range. The setting will be
store in the memory. To go back to the functions without any change press the MENU button
again.
In manual color mode, you can use DOWN and UP button to set the
(Red 0~255)
(Green 0~255)
(Blue 0 ~255)
Software version
Press the MENU button up to when the
button and the display will show the version of software of the unit. To go back to the
functions press the MENU button again.
Display Inversion
It is good for you to install the unit on the floor or under ceiling. Press the MENU button until
the is blinking on the display. Use DOWN and UP button to select the
is shown on the display. Pressing ENTER button
(yes blackout) or
is showing on the display. Pressing ENTER button
(Led on) or
is showing on the display. Pressing ENTER button
(color 1) or
is blinking on the display. Pressing ENTER
8E