Screen Color; Test Pattern - Canon WUX7500 User Manual

Menu Description
• To lock (protect) the saved position, set [Positional lock] (P143) to [On].
• The values of the following settings are saved in addition to the lens position
information (including focus, zoom, and lens shift settings):
- Horizontal-vertical keystone / Corner adjustment
-

Screen color

- Digital image shift
- Screen aspect
- Zoom
• [Load position] is not available unless you perform [Save position] once.
• The original lens position varies depending on the type of lens used.
• When saved lens positions are restored, images may be projected in a slightly different
position than the saved position.
• Specifying a somewhat smaller image size than the screen size (image area) enables
you to switch among multiple lens positions without having the image extend off the
screen.
• When precise positioning is needed, use lens shift, zoom, and focus functions for fine
adjustment.
Screen color
> [Install settings] >
You can adjust the color quality of the images projected according to the color of
the projection screen.
Submenu
Select this if a standard type of projection screen is used. The images
Normal
are projected in a light quality similar to that of natural light.
Select if a dark green surface such as a blackboard is used as the
Greenboard screen. The color quality similar to [Normal] is obtained on the
greenboard.
Adjust Select to fine-tune red, green and blue.

Test pattern

> [Install settings] >
You can project a test pattern (P105) to check resolution, color, and other details
even without supplying an input signal. Also available by pressing the TEST
PATTERN button on the remote control.
Option
Off
On
• While the test pattern menu is displayed, you can use the [
patterns. Additionally, options of test pattern that have options can be changed with the
[ ] / [ ] buttons.
• The test pattern menu is no longer displayed after a little while, but you can view it
again by pressing the [
[Screen color]
[Test pattern]
Disable test pattern display.
Enable test pattern display.
] / [ ] buttons.
152
Function
Function
] / [ ] buttons to switch